Saturday, 19 September 2026

Guides · Tips · How-To

ZAVERO GUIDES

Home & Living

Practical, easy-to-follow articles collected in one place so you can find the answer you need faster.

  • Mineral buildup can block showerhead spray holes and make a good shower feel strangely weak. Cleaning the buildup is a simple maintenance job, and the EPA specifically recommends periodically inspecting showerheads for scale and using a cleaning product or white vinegar to remove it.

    Person cleaning a showerhead in a bathroom
    Photo: Pexels

    1. Check the showerhead first

    Look at the spray holes and the connection where the showerhead meets the pipe. If you see white or chalky deposits, buildup may be restricting the flow.

    2. Use white vinegar or a compatible cleaner

    For a removable showerhead, place it in a container with enough white vinegar to cover the mineral deposits. Let it soak for a reasonable period, then rinse thoroughly. Follow the showerhead manufacturer’s instructions if they call for a different method.

    3. Loosen stubborn deposits gently

    Use an old soft toothbrush or soft cloth to work around the spray holes. Avoid aggressive metal tools that can damage finishes or the small openings.

    4. Rinse before reinstalling

    Flush the showerhead with clean water and make sure no cleaner remains inside. Reattach it securely and check for leaks around the connection.

    5. Keep an eye on flow

    If the spray pattern becomes uneven again soon after cleaning, inspect for more buildup. A persistent leak or damaged connection may need repair or replacement instead of another cleaning.

    • Inspect for scale buildup.
    • Soak with white vinegar when compatible with the fixture.
    • Brush deposits gently.
    • Rinse thoroughly.
    • Check the connection for leaks after reinstalling.

    A two-minute prevention habit

    Wipe obvious mineral deposits from the outside of the showerhead during your normal bathroom cleaning. Small buildup is easier to remove than a thick crust that has been collecting for months.

    Related on Zavero

    How to Remove Hard Water Stains From Glass and Fixtures · How to Clean a Washing Machine: Front-Load and Top-Load Methods

    Sources

    U.S. EPA WaterSense: Home Maintenance

    How to Clean a Showerhead and Remove Mineral Buildup

    A showerhead with mineral buildup can spray unevenly or lose pressure. A simple soak and rinse can often clear the deposits.

  • Hard-water spots are those cloudy white or crusty mineral deposits that show up on shower glass, faucets and other fixtures. The trick is to dissolve the buildup instead of trying to scrub it away with abrasive tools.

    Person cleaning glass in a shower
    Photo: Pexels

    Start with glass

    For ordinary glass shower doors, a diluted white-vinegar solution can help loosen mineral deposits. The Home Depot recommends letting vinegar sit briefly on the glass before gently scrubbing with a non-abrasive sponge or soft brush, then rinsing.

    Never use abrasive scouring pads on glass. They can leave scratches.

    Try a gentle approach on faucets

    For chrome or other compatible fixtures, apply your chosen mineral-buildup cleaner to a cloth rather than flooding the fixture. Let it work according to the product directions, then rinse and dry.

    Be careful with natural stone

    Do not automatically use vinegar on every bathroom surface. The Natural Stone Institute warns that acids can dull or etch some natural stones, especially calcareous stones such as marble, limestone and travertine. Check the surface material and its manufacturer’s cleaning instructions first.

    Remove the stain before it becomes a thick crust

    A quick wipe after the shower can prevent water from drying onto the glass and leaving a fresh layer of minerals. A squeegee or soft towel is often more useful as prevention than another strong cleaning session later.

    • Use non-abrasive tools on glass.
    • Follow cleaner directions and test an inconspicuous area.
    • Do not use acidic cleaners on acid-sensitive stone.
    • Rinse thoroughly and dry the surface afterward.
    • Prevent new spots by removing standing water regularly.

    When to use a stronger product

    If a mild method does not work, use a product specifically labeled for mineral or hard-water buildup on that surface. Stronger is not automatically better; compatibility with the material matters more.

    Related on Zavero

    How to Clean a Showerhead and Remove Mineral Buildup · How to Clean a Microwave in 10 Minutes

    Sources

    The Home Depot: How to Clean Glass Shower Doors · Natural Stone Institute: Learn About Cleaning Products for Natural Stone

    How to Remove Hard Water Stains From Glass and Fixtures

    Cloudy spots on shower glass and faucets usually need the right kind of cleaner, not more scrubbing. Start gently and protect surfaces that can react to acids.

  • Baseboards do not need a complicated cleaning system. Most of the time, the winning combination is a vacuum attachment, a slightly damp microfiber cloth and a few extra minutes for the spots that actually need scrubbing.

    Person cleaning a floor in a tidy home
    Photo: Pexels

    Start dry

    Run a vacuum brush or soft attachment along the top edge and face of the baseboard. Removing loose dust first keeps you from turning it into a muddy film when you wipe.

    Use a barely damp microfiber cloth

    For painted or finished baseboards, dampen a microfiber cloth with warm water and wring it out well. Wipe in long sections instead of repeatedly rubbing the same spot.

    Handle fingerprints and sticky marks separately

    If plain water does not remove a mark, use a small amount of mild dish soap diluted in water. Put the cleaner on the cloth rather than soaking the trim, then wipe with clean water and dry.

    Do not ignore the corners

    Corners and the top lip collect dust because the vacuum cannot always reach them. A microfiber cloth wrapped around a thin handle or a small soft brush can make those areas much faster to clean.

    Choose a realistic routine

    You do not need to deep-clean every baseboard every week. Vacuum or dust the high-visibility areas during your normal floor cleaning, then do a more detailed wipe when you notice buildup.

    • Vacuum the top edge first.
    • Wipe with a barely damp microfiber cloth.
    • Use diluted mild soap only where needed.
    • Dry painted or finished trim after cleaning.
    • Use a small brush for corners and grooves.

    The 10-minute version

    Put on a podcast, grab the vacuum and microfiber cloth, and work around one room at a time. You will get more done by keeping the process simple than by waiting for a giant cleaning day.

    Related on Zavero

    The Ultimate Home Cleaning Checklist · How to Make a Small Room Look Bigger Without Remodeling

    How to Clean Baseboards Without Spending All Day

    Baseboards collect dust faster than you notice. This simple routine lets you clean them quickly without turning the job into an all-day project.

  • HOME & LIVING · SMALL SPACES

    You do not need to knock down a wall to make a small room feel better. Light, sightlines, furniture scale and clutter can change how large a room feels without major construction.

    Small bedroom with a bed and compact furniture
    Photo: Pexels

    1. Keep the main floor area open

    Start by removing furniture you rarely use and keeping walking paths clear. A room can feel cramped because of visual obstacles even when the actual square footage has not changed.

    2. Use lighter surfaces when you can

    U.S. Department of Energy building guidance notes that light-colored walls and floors reflect more light and can make rooms feel brighter and larger. You do not have to repaint everything; curtains, rugs and furniture can also lighten the visual balance.

    3. Bring in more daylight

    Keep windows as clear as practical during the day. Sheer or lightweight window treatments can preserve privacy while letting more daylight into the room.

    4. Add a well-placed mirror

    A large mirror can reflect light and create another visual layer in the room. Place it where it reflects a window or a bright area rather than a cluttered corner.

    5. Pick furniture that fits the room

    Bulky furniture can dominate a small room. Look for pieces with a smaller footprint, visible legs or a simpler silhouette that leaves more of the floor visible.

    6. Use one visual focal point

    Too many competing patterns and decorations can make a room feel busy. Give the eye one main feature—a piece of art, a rug, a headboard or a plant—and keep the rest quieter.

    7. Take storage upward

    Use shelves or tall storage when the room allows it. Vertical storage keeps the floor clearer while giving you more places to put everyday items.

    8. Keep colors related

    You do not need an all-white room. Using a tight palette of related colors can make the space feel more continuous instead of visually chopped into small sections.

    9. Hide everyday clutter

    Mail, chargers, shoes and small objects create visual noise quickly. Use baskets, drawers and simple storage zones so surfaces can stay mostly clear.

    A quick small-room reset

    1. Clear the main walking path.
    2. Move one bulky piece of furniture if possible.
    3. Open the curtains and clean the window.
    4. Remove five objects you do not need in the room.
    5. Add or reposition one mirror.
    6. Group decorations instead of scattering them everywhere.

    Bottom line: More visible floor, more daylight and less visual clutter can make a small room feel noticeably more open without remodeling it.

    Source: U.S. Department of Energy building-design guidance. Featured image: Zavero News illustration.

    How to Make a Small Room Look Bigger Without Remodeling

    Make a small room feel more open with lighter surfaces, better lighting, fewer visual obstacles, mirrors and furniture sized to the space.

  • HOME & LIVING · BEDROOM

    Your mattress does not need to be soaked to be clean. In fact, many mattress materials can be damaged by too much moisture. A better routine is to remove the bedding, vacuum the surface, spot-clean carefully, deodorize when appropriate, and let everything dry completely.

    Clean modern bedroom with a neatly made white bed
    Photo: Pexels

    1. Strip the bed

    Remove sheets, mattress protectors and other bedding so you can actually reach the mattress surface. Wash the bedding according to its care labels while the mattress is being cleaned.

    2. Vacuum the mattress

    Use an upholstery attachment or handheld vacuum and work across the top, edges and seams. A 2026 Casper cleaning guide recommends vacuuming first to remove dust, dirt, hair and other loose material.

    3. Spot-clean stains instead of soaking the mattress

    Use only a small amount of a fabric-appropriate cleaner and blot rather than aggressively scrubbing. Tempur-Pedic’s current care guidance says non-removable covers should be spot-cleaned gently and that the mattress should not be saturated.

    Always check the care instructions for your particular mattress. Foam and specialty materials can have very different cleaning requirements.

    4. Deodorize a dry mattress

    For ordinary odors, a light layer of baking soda can be left on the surface for a period of time and then vacuumed up. Casper currently recommends baking soda as a deodorizing step after the mattress is dry.

    5. Let the mattress dry completely

    Do not remake the bed while the mattress is still damp. Use airflow or a fan when appropriate. Tempur-Pedic specifically advises allowing treated areas to air dry completely and warns against saturating its mattress material.

    6. Rotate only if your mattress instructions allow it

    Some mattresses can be rotated, while others have a fixed top and bottom. Follow the manufacturer’s instructions instead of automatically flipping the mattress.

    What not to do

    • Do not soak the mattress.
    • Do not use bleach unless the manufacturer explicitly allows it.
    • Do not trap moisture underneath bedding.
    • Do not use a cleaning product that has not been checked against the mattress care label.

    For a regular home routine, see A Simple Cleaning Schedule You Can Actually Keep Up With.


    Bottom line: Vacuum first, spot-clean carefully, deodorize a dry mattress when appropriate, and prioritize complete drying over aggressive cleaning.

    Sources: Casper and Tempur-Pedic mattress-care guidance. Featured image: Zavero News illustration.

    How to Clean a Mattress and Get Rid of Odors

    Freshen a mattress safely by vacuuming, spot-cleaning carefully, controlling moisture and deodorizing without soaking the material.

  • HOME & LIVING · CLEANING

    Sticker residue is annoying because the adhesive can be tougher than the sticker itself. The safest approach is to start gently, use the right tool for the surface, and test any stronger cleaner somewhere hidden before treating the whole area.

    Person removing a label from a plastic bottle
    Photo: Pexels

    1. Peel off what you can first

    Lift as much of the label as possible with your fingernail or a plastic scraper. Avoid digging a sharp metal edge into painted, plastic or finished surfaces.

    2. Start with warm, soapy water

    For washable hard surfaces, a damp cloth with warm water and dish soap is a sensible first step. Let it sit briefly on the residue, then wipe gently.

    3. Use a plastic scraper for stubborn spots

    Work slowly and keep the scraper nearly flat against the surface. The goal is to lift the softened adhesive without gouging the finish underneath.

    4. Try rubbing alcohol only when the surface allows it

    Some hard surfaces tolerate isopropyl alcohol well, while painted, coated or delicate finishes can react differently. Test a hidden spot first and stop if the finish changes.

    5. Use a purpose-made adhesive remover when needed

    Commercial adhesive removers can work well on stubborn residue. 3M says its consumer adhesive-remover products can remove sticker and tape residue from certain surfaces such as glass and vinyl, but always follow the product label and confirm that the particular surface is approved.

    For example, 3M’s Adhesive Remover provides surface-specific instructions.

    6. Be extra careful with finished wood and painted surfaces

    Do not assume a cleaner that works on glass will be safe on a painted cabinet or finished wood table. Lowe’s current adhesive-removal guide also recommends choosing tools and materials based on the surface and testing as needed.

    See the Lowe’s adhesive-residue guide for surface-specific considerations.

    7. Clean away the remaining film

    Once the adhesive is gone, wipe the area with the appropriate cleaner for the surface, then dry it. This removes leftover oily residue from the adhesive remover.

    What not to do

    • Do not attack delicate finishes with a razor blade.
    • Do not soak electronics.
    • Do not mix cleaning chemicals.
    • Do not use a strong solvent on an unknown finish without testing first.
    • Do not scrub aggressively when gentle lifting will work.

    Bottom line: Start with the least aggressive method, soften the adhesive, use a plastic scraper and only move to a stronger remover after confirming the surface can handle it.

    Sources: 3M and Lowe’s adhesive-removal guidance. Featured image: Pexels.

    How to Remove Sticker Residue Without Damaging the Surface

    Remove stubborn sticker and label residue from glass, metal, plastic and finished surfaces by softening the adhesive first and testing any cleaner before full use.

  • HOME & LIVING · LAUNDRY

    A grease stain gets harder to deal with after heat sets it into fabric. The best move is to treat the spot before the garment goes through the dryer and use a method suited to the fabric.

    Person treating clothes during a laundry routine
    Photo: Pexels

    1. Act before the stain dries

    The American Cleaning Institute recommends treating stains as early as possible. The longer a grease or oil stain sits, the more difficult it can become to remove.

    2. Blot or remove excess grease first

    Gently remove any food or solid material without spreading it farther. Avoid aggressively rubbing the stain into the fabric.

    3. Pretreat the spot

    For washable clothing, ACI recommends a prewash stain remover or liquid laundry detergent for light grease stains. Apply the product to the affected area according to its label and give it time to work.

    4. Wash using the hottest safe temperature

    Check the clothing care label and choose the warmest wash temperature that is safe for the garment. ACI specifically recommends the hottest water safe for the fabric for grease and oil stains.

    5. Check the stain before using the dryer

    This is the step people skip. Look at the fabric while it is still wet. If you can still see the grease mark, treat and wash it again. Do not put it in the dryer until the stain is gone because heat can set it.

    6. For a stubborn grease stain

    For heavier stains, ACI advises placing the stain facedown on paper towels, applying an appropriate cleaning fluid to the back of the stain and laundering after rinsing. Because solvents can damage some fabrics, follow product directions and test an inconspicuous area when appropriate.

    7. Know when to stop experimenting

    Delicate, dry-clean-only, specialty or valuable garments deserve different care. Do not improvise with harsh cleaners when the label calls for professional cleaning.

    For more laundry help, see How to Get Bad Smells Out of Clothes Without Washing Them Twice.


    Bottom line: Treat grease early, pretreat before washing, use the warmest safe setting and check the garment before it goes into the dryer.

    Source: American Cleaning Institute stain-removal guidance. Featured image: Pexels.

    How to Remove Grease Stains From Clothes

    Remove fresh grease and oil stains from washable clothes by pretreating early, using the right detergent and keeping the garment out of the dryer until the stain is…

  • HOME & LIVING · CLEANING

    A microwave can look filthy long before it actually takes much effort to clean. A little steam loosens dried-on splatters, and a soft cloth usually does the rest. Here’s a quick method that works for routine messes without turning the cleanup into a whole project.

    Modern kitchen with a microwave and oven
    Photo: Pexels

    Quick answer: steam the grime loose, then wipe it clean

    Put about 1 cup of water in a microwave-safe container and heat it for a few minutes so the steam can soften dried-on food. Then wipe the interior with a soft cloth or sponge and a little mild dish soap, rinse with clean water, and dry. Whirlpool recommends this approach for heavy soil and routine interior cleaning.

    1. Remove the turntable and loose food

    1. Turn the microwave off.
    2. Remove the glass turntable and any removable support parts.
    3. Pick up loose food pieces and crumbs.

    Starting with the loose mess keeps it from getting pushed around while you clean the surfaces.

    2. Steam the dried-on splatters

    1. Fill a microwave-safe cup or bowl with about 1 cup of water.
    2. Heat it for about 3 to 5 minutes, following your appliance guidance.
    3. Let the steam soften the residue before opening the door fully.

    Whirlpool says the steam can loosen heavy soil so it is easier to wipe away.

    3. Wipe the inside with mild soap and water

    Use a soft cloth or sponge dampened with water and a little mild dish soap. Wipe the walls, ceiling, floor and the area around the door seal. Rinse the cloth and wipe away soap residue, then dry the interior with a soft, lint-free cloth.

    4. Clean the turntable and outside

    Wash the removable turntable according to your model’s instructions and dry it before replacing it. For the exterior, use a soft cloth. On stainless-steel models, Whirlpool recommends wiping in the direction of the grain.

    5. Avoid abrasive cleaners and scouring pads

    Skip steel wool, gritty cloths and abrasive cleaners that can damage the cavity or finish. Whirlpool recommends mild, non-abrasive cleaning materials for the microwave interior.

    6. How to get a bad smell out of a microwave

    Once the food residue is cleaned away, Whirlpool suggests heating 1 cup of water with about 1 tablespoon of lemon juice or vinegar for a few minutes to help with lingering odors. Finish by drying the interior.

    Frequently asked questions

    How long should I steam a microwave to clean it?

    Whirlpool’s guidance uses roughly 2 to 5 minutes for heavy soil, depending on the microwave. Use a microwave-safe container and follow your model’s instructions.

    Can I use vinegar to clean a microwave?

    Whirlpool recommends water with a small amount of vinegar or lemon juice as an option for loosening grime and helping remove odors.

    What should I avoid when cleaning a microwave?

    Avoid abrasive cleaners, steel wool and other materials that can scratch or damage the cavity or finish.


    Bottom line: A little steam and a soft cloth can handle most microwave messes. Clean the inside gently, avoid abrasives, and dry everything before using the microwave again.

    Sources: Whirlpool cleaning and care guidance. Featured image: Pexels.

    How to Clean a Microwave in 10 Minutes

    Clean a dirty microwave quickly with steam, mild soap and a soft cloth, plus simple tips for stubborn splatters and lingering odors.

  • HOME & LIVING · CLEANING

    A dirty oven can turn a simple wipe-down into a greasy mess. The trick is to work in stages: let the oven cool completely, remove the loose debris, clean the removable parts, then tackle the interior with a method that matches your oven. That last part matters because self-cleaning ovens can have different cleaning instructions from manual-clean models.

    Woman placing a dish into an oven in a modern kitchen
    Photo: Pexels

    Quick answer: cool it down, remove the racks, then clean in sections

    Turn the oven off and let it cool completely. Remove the racks and loose crumbs first. Then clean the interior with the mild or non-abrasive method recommended for your model. If your oven has a Self-Clean cycle, read the manufacturer’s instructions before using commercial oven cleaner; GE specifically says not to use commercial oven cleaners on its self-clean ovens.

    1. Start with a completely cool oven

    1. Turn the oven off.
    2. Wait until the oven and racks are cool enough to handle safely.
    3. Remove cookware, trays and loose items.
    4. Open a window or improve ventilation if the oven has heavy buildup.

    Cleaning a hot oven is both harder and less safe. Whirlpool also recommends ensuring controls are off and the oven is cool before cleaning.

    2. Remove and clean the oven racks

    Take the racks out before cleaning the oven interior or using a Self-Clean cycle unless your manual says otherwise. Whirlpool recommends removing racks before Self-Clean because they can discolor and become harder to slide.

    Wash the racks using the cleaning method approved for your model, rinse them thoroughly and dry them before putting them back.

    3. Wipe out crumbs and loose grease first

    Use a damp cloth or paper towel to pick up loose food and wipe away the easiest residue before applying any cleaner. Getting the loose mess out first means you will not turn crumbs into a wet, greasy paste.

    4. Clean the interior with the method your oven allows

    For self-clean ovens, GE recommends mild dish soap and water for manual cleaning and warns against commercial oven cleaners on the self-cleaning liner. Whirlpool’s guidance likewise warns against oven cleaners on certain self-cleaning models.

    If your oven is not self-cleaning, follow its use-and-care guide for approved cleaners and surfaces. A soft cloth, sponge and a non-abrasive cleaner are generally safer starting points than abrasive powders or metal scouring materials.

    5. Clean the oven door without damaging the seal

    Wipe the inside of the door using the method recommended for your model, but do not scrub or move the door gasket. GE specifically warns against rubbing or cleaning the gasket on self-clean ovens because it is part of the oven’s seal.

    6. Put everything back only after it is dry

    Rinse away approved cleaners as directed, wipe the interior dry and let removable parts dry fully before reinstalling them. Once the oven is clean, keeping spills from sitting for long can make the next cleanup much easier.

    Should you use the Self-Clean cycle?

    That depends on your oven and its manual. Self-Clean cycles create very high heat, and manufacturers provide specific preparation steps. Whirlpool advises removing racks, loose soil and other items before using Self-Clean and keeping the kitchen ventilated during the cycle.

    Frequently asked questions

    Can I use commercial oven cleaner on a self-cleaning oven?

    Do not assume it is safe. GE specifically says not to use commercial oven cleaners on its self-clean ovens, and Whirlpool also warns against oven cleaners on certain self-cleaning models. Check your exact manual.

    How often should I clean my oven?

    There is no single schedule for every household. Clean spills when the oven is cool, and do a deeper cleaning when grease and buildup start affecting the interior.

    Should I remove oven racks before Self-Clean?

    Usually yes, unless your oven’s manual specifically says otherwise. Whirlpool recommends removing racks before Self-Clean.


    Bottom line: Cool the oven first, clean in sections, and follow your exact model’s instructions—especially when using a Self-Clean cycle or any commercial cleaner.

    Sources: GE Appliances and Whirlpool cleaning and care guidance. Featured image: Pexels.

    How to Clean an Oven Without Making a Huge Mess

    A practical guide to cleaning your oven safely, from removing racks and loose grease to handling self-cleaning ovens and the door gasket.

  • HOME & LIVING · CLEANING

    Your washing machine cleans your clothes, but the machine itself still needs a little maintenance. Detergent residue, moisture and grime can build up over time, especially around the door seal, dispenser and drum. Here’s a simple way to clean a front-load or top-load washer without overcomplicating it.

    Clean and spacious laundry room with modern washing machines and cabinets
    Photo: Pexels

    Quick answer: clean the drum, seals, dispensers and exterior

    Start with an empty washer and follow your machine’s care guide. If your washer has a dedicated Clean Washer cycle, use it with the cleaner recommended by the manufacturer. Then wipe the parts you can reach, especially the detergent dispenser and, on front-load machines, the rubber door seal. Whirlpool and Maytag both recommend checking the owner’s manual first because cleaning products and cycles vary by model.

    1. Empty the washer first

    1. Remove all clothing and other items.
    2. Check the drum for socks, labels or other small items.
    3. Keep the washer empty for the cleaning cycle.

    Starting with an empty machine gives the cleaner and wash cycle direct access to the tub instead of laundry getting in the way.

    2. Run the washer’s cleaning cycle

    Check whether your washer has a cycle specifically made for cleaning the machine. If it does, follow the instructions in the owner’s manual and use the cleaner or product your model permits. Whirlpool notes that some models can use a washer-cleaning tablet, while bleach is only appropriate for certain machines.

    If your machine does not have a cleaning cycle, the manual may recommend another empty hot-water cycle. Don’t guess at the cleaner or amount: washer designs are different, so the manufacturer’s instructions should win.

    3. Clean the detergent dispenser

    1. Pull the dispenser out as far as it is designed to go.
    2. Remove it if your model allows it.
    3. Rinse away residue with warm water and use a mild detergent when needed.
    4. Wipe the compartment clean.
    5. Dry the dispenser before putting it back.

    Not every dispenser is removable, and Whirlpool notes that dispensers are not generally dishwasher-safe, so avoid forcing the drawer or assuming it can go in the dishwasher.

    4. Give a front-load washer’s door seal extra attention

    Front-load washers have a rubber gasket around the door where moisture and residue can collect. Wipe the seal with a damp cloth and gently clean beneath the rubber lip where buildup can hide. Whirlpool and Maytag both specifically call out the gasket as part of routine front-load washer care.

    5. Clean the agitator or tub area on a top-load washer

    If your top-load machine has an agitator, wipe around it and check for residue. Some agitator caps are removable and some are not. If the cap does not come off easily, do not force it; check the owner’s manual instead.

    6. Wipe the outside and leave the washer open

    Use a soft, damp cloth or sponge on the outside of the machine. After the cleaning cycle, leave a front-load washer door ajar—or the top-load lid open when appropriate—to let the interior dry. Whirlpool and Maytag both recommend allowing airflow between washes.

    How often should you clean a washing machine?

    Whirlpool and Maytag both point to roughly every 30 washes as a useful maintenance interval, although the right schedule can vary with your machine and how often you use it. If your washer develops a smell or visible buildup, clean it sooner.

    Frequently asked questions

    How often should I clean my washer?

    Around every 30 washes is a common manufacturer guideline, but check your machine’s manual and clean it sooner if you notice odors or buildup.

    Can I use bleach to clean a washing machine?

    Some machines allow liquid chlorine bleach and others do not. Check the owner’s manual before using it.

    Why does my washing machine smell?

    Residue, detergent buildup, moisture and loads left sitting too long can contribute to odors. Regular cleaning and leaving the machine open to dry can help.


    Bottom line: Keep the washer empty for the cleaning cycle, follow the model-specific instructions, wipe the parts where residue collects, and give the machine airflow between loads.

    Sources: Whirlpool and Maytag appliance-care guides. Featured image: Pexels.

    How to Clean a Washing Machine: Front-Load and Top-Load Methods

    Learn how to clean a front-load or top-load washing machine, including the drum, door seal, detergent dispenser and the best time to run a cleaning cycle.